The SPA3102 is a Linksys device, similar to the PAP2/T line of devices in appearance and configuration. In addition to the similar appearance the SPA3102 also adds extra features not present in the PAP2/T such as an FXO (Foreign Exchange Office: allowing you to use a normal PSTN line or PBX line for redundancy in case of an outage on your ISP…etc) and a built in router allowing you to share your internet without the need for a standard router/switch.
The SPA3102 is reliable and relatively inexpensive and can be considered by individuals who want the extra PSTN functionality for their specific environments.
The configuration information below is based on firmware version 5.1.7(GW), which is the latest version as of this writing.
Before we proceed please make sure that your SPA3102 is powered on and that you have an ethernet (RJ45) cable connected with one end to your router/modem/gateway and the other end to the blue port on the back of the SPA3102.
The Nokia VoIP phones N series with SIP capabilities using the Symbian platform was a mobile operating system designed for smartphones was discontinued on May 2014. The website symbian.org and the brand Symbian was originally developed in 1998 as a proprietary OS software for PDAs. Symbian Ltd. consortium was founded on 1998.
Configure your Nokia VoIPSymbian phone with a VoIP provider to make phone calls from your mobile while saving money on local long distance, Switch2VoIP offers low cost calling to the USA under 1 cent per minute. You can login to the VoIP account here.
Download Symbian software for Nokia VoIP
You can see a list of VoIP supported mobile devices in the Nokia Website (deprecated.
Start by downloading the free Symbian Nokia VoIP application from the Nokia website and you will get the latest software available for your equipment.
Eyebeam is one of the Softphones that has inbuilt the codec G729 which can help you save up to 80% of your bandwidth resulting in a superior sound quality on your VoIP calls. Below is a walktrough that shows you how to select the codec G729 on your Eyebeam:
STEP 1 Right Click on the main screen and select SETTINGS
STEP 2 Click on MEDIA
STEP 3 Click on AUDIO
STEP 4 Click on ADVANCED, on the right side you will see two boxes, move all the codecs to the left leaving only the G729 on the right side window.
FINAL STEP Click on Apply and then OK and you’re all set.
Learn how to configure the X-Lite softphone, other versions such as X-Ten, Eyebeam and Bria are from the same family and can be setup using these instructions.
X-Lite softphone allows to dial any landline or mobile phone number from PC to phone and get all phone calls connected. Signup for a SIP account with a VoIP provider to contact your customers worldwide.
Download and install X-Lite softphone
The first step is to download the X-Lite softphone to your computer or mobile device.
This is a tested version of the X-lite that works faster than the latest version hosted on the developer’s site:
VoipSwitch is a complete suite of SIP network elements, a billing platform that enables calling card retail service, residential VoIP telephony, mobile VoIP, business PBX, cloud communications, and multilevel reseller portal for networks and sales agents all in a single software platform that handles thousands of concurrent calls.
VoIPSwitch SIP trunk settings instructions
The example below shows you an example of how to populate the fields on VoIPSwitch SIP trunk settings with Switch2VoIP VoIP provider.
VoIPSwitch SIP trunk settings
Go to GK/Registrar
On description write Switch2VoIP
On Host enter theIP
On parameters, you should select Registrar if you want to authenticate with the username and password provided by Switch2VoIP for the VoIPSwitch SIP trunk settings.